News & Press

NEWS & PRESS

Scan code view

Zhejiang Tianjie Industrial Corporation

Tel: +86 571 23656026
Fax: +86 571 23656068

Email:info@tian-jie.com
Address: Linglong Economic Development Zone, Lin'an Hangzhou, China 311301
 

Support

FAQ

Sales Network

 

SERVICE

Copyright: Zhejiang Tianjie Industrial Corporation   浙ICP备19019105号-1
 

PRODUCTS

Page view

FIBER OPTICAL GYFTY53-12

Classification
Brand
OEM
Product origin
China
Delivery time
25 days
Supply capacity
10000km
没有此类产品
Inquiry
Download
Product Description
1.Structure description
Non-metal FRP Strength member, loose tube type,gelly filled, Polyethylene(PE) sheath, outerdoor optical fiber cable for telecommunication.
1.1 Technical characteristics: 
Non-metal Strength member,Loose tube stranding type, gelly filled, Polyethylene(PE) inner sheath, PSP armor and Polyethylene(PE) outer sheath, Outerdoor optical fiber cable for telecommunication
1.2 Technical characteristics:
- Very strict material and manufacturing control guarantees stable product quality.
-Total cross-section water-resistant structure make cable have an excellent properties of moisture resistance
- Special jelly filled in the loose tube provides the fibers with critical protection
-The central member adopted corrosion resistant, high young's modulus phosphatic steel wire.
-PSP armor structure has super crush resistance.
-Double-sided plastic strip (PSP) moisture-proof layer
2. Cable Specification
2.1 The both cable ends are sealed with heat shrinkable end caps to prevent water ingress.
2.2 Fiber color and Binder color code: according to EIA/TIA 598B
 

No
1
2
3
4
5
6
7
8
9
10
11
12
Fiber Color
Blue
Orange
Green
Brown
Slate
White
Red
Black
Yellow
Violet
Pink
Aqua
 
*According to the customer required for color scheme.
2.3 Loose tube color scheme
2.4 Color codes for Loose Tube (LT) & Filler Rod (FR)
 

                                                       Element No.
1
2
3
4
5
6
7
8
9
10
11
12
LT
LT
FR
FR
FR
FR
-
-
-
-
-
-
 
3 Cable structure and parameter
 
Fiber
12 B1.3(G652D)
Tube diameter (mm)
1.8 mm
Fiber per tube
6
Class Yarn(root)
10
Central Strength member (mm)
1.9mm FRP
Outer Sheath thickness (nominal*)(mm)
1.5mm
Inner Sheath thickness (nominal*)(mm)
0.9mm
Steel tape thickness(mm)
0.23mm
Water blocking tape thickness(mm)
0mm
Cable diameter (nominal**)(mm)
11.9mm
Weight (approx.)(kg/km)
130kg/km±5%
Max.allowable pulling force(N)
Installation:3000/operation1500
Crush resistance(N/100mm)
2500
Min bend radius(mm)
Long-term 10 OD
Short-term 20 OD
Operating temperature range
-40℃ to +60℃
Storage / Transport temperature range
-20℃ to +60℃
Installation temperature range
0℃ to +60℃
12 cores Total unit number (LT+FR)
6(2LT+4FR)
* The nominal sheath thickness may vary by ±0.2mm.
** The nominal outer diameter and height may vary by ±0.4mm.
***LT means: loose tube. FR means: Filler rod.
 
4. Main mechanical & environmental characteristics test
 

No
Item
Test Method
Acceptance Requirements
1
Tensile Strength
IEC 794-1-E1
- Load: 3,000 N
- Length of cable under load: 50m
- Loss change 0.1 dB @1550 nm
- No fiber break and no
sheath damage.
2
Crush Test
IEC 60794-1-E3
- Load: 1, 000 N/100mm
- Load time: ≥1min
- Loss change 0.1 dB @1550 nm
- No fiber break and no
sheath damage.
3
Impact Test
IEC 60794-1-E4
- Points of impact: 5
- Times of per point: 5
- Impact energy: 4.5Nm
- Radius of hammer head: 12.5mm
- Impact rate: 2sec/cycle
- Loss change 0.1 dB @1550 nm
- No fiber break and no
sheath damage.
4
Repeated Bending
IEC 60794-1-E6
- Bending Dia.: 20 x OD
- Load: 250N
- Flexing rate: 3sec/cycle
- No. of cycle: 30
- Loss change 0.1 dB @1550 nm
- No fiber break and no
sheath damage.
5
Torsion
IEC 60794-1-E7
- Length: 1m
- Load: 150N
- Twist rate: 1min/cycle
- Twist angle: ±180°
- No. of cycle: 10
- Loss change 0.1 dB @1550 nm
- No fiber break and no
sheath damage.
6
Water Penetration
IEC 60794-1-F5B
- Height of water: 1m
- Sample length: 3 m
- No water shall have leaked from
the opposite end of cable
7
Temperature Cycling
IEC 60794-1-F1
- Temperature step:
+20oC→-40oC→+60oC →+20oC
- Time per each step: 24 hrs
- Number of cycle: 2
- Loss change 0.1 dB @1550 nm
- No fiber break and no
sheath damage.
8
8 Compound Flow
IEC 60794-1-E14
- Sample length: 30 cm
- Temp: 70°C 2°C
- Time: 24 hours
- No compound flow
9
Sheath High Voltage Test
- On line test
- 9t KV (t-sheath thickness)
- No sheath breakdown
 
5. Packing and Marking
5.1 Packing
5.1.1 Each single length of cable shall be reeled on Fumigated Wooden Drum OR Iron-wooden
drum suitable for long distance shipment.
5.1.2 Covered by plastic buffer sheet.
5.1.3 Sealed by strong wooden battens.
5.1.4 At least 1 m of inside end of cable will be reserved for testing.
5.1.5 Drum length
5.1.5.1 Standard drum length is 2100m±100m;
5.1.5.2 Single length not less than 96% of standard length per drum shall be permitted for quantity
not exceeding 10% of the total supply;
5.1.5.3 Total quantity is at least the ordered quantity.
5.2. Drum Marking
5.2.1 Cable drum
- Manufacturer brand;
- Roll-direction arrow;
- Cable outer end position indicating arrow;
- The word “FIBER OPTICAL CABLE”;
- Origin, The word “MADE IN CHINA”;
- Caution plate indicating the correct method for loading, unloading and convey the cable;
- Other customer information such as contract no., project no., and delivery destination.(if needed)
5.2.2 Marking plate
- Product name;
- Cable type and size;
- Drum length;
- Gross / Net weight in kilograms;
- Drum number in meters;
- Manufacturer's name;
- Manufacturing year and month;
- Project number, contract number or purchasing order number (if needed).
5.3 Cable identification documents
- Test report.
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待